Summa Driver

Download SignCut Pro 2

1. Summa Drivers Download
2. Summa D520 Driver
3. How To Install Summa Drivers In Onyx Thrive
4. Summa Driver
5. Summa Drivers Windows 7

The worst-case scenario at this point would be a blown computer driver. As I pointed out earlier, this procedure works about 95% of the time. One of the vehicles it didn't work with was a 1997 Toyota 4Runner with the V6 engine. Find comprehensive information about Summa cutting equipment and use the Solution Finder to find the ideal cutting solution for your specific workflow. Summa intends to regularly update its software offerings and to launch further enhancements. Download the latest software and firmware here or request backup and activation files. Summa Cutter Control 4.20.0.0 Software interface for adjusting parameters on Summa legacy cutter, including speed, mode, pressure, blade offset and much more. Supports Vista/Win 7/Win 8/10. Plug-in for CorelDraw 12 - 2020 and Illustrator CS - CC 2020 Plug-in for CorelDraw & Illustrator to use with Winplot 6.6 or higher. Summa GoSign: Version.

Download SignCut Pro 2 now and enjoy your free three weeks trial in Premium!
No license is needed. Just download, install and activate the trial.

System Requirements

Windows XP or higher
Memory: 256 MB system RAM
Hard Drive: 120 MB or more free space
Output: USB, serial/parallel to USB converter,
parallel, TCP/IP, Ethernet

SignCut Pro 2 Version 0.1.480

– New Adobe Illustrator Plugins for Illustrator 2020.0, 2020.1, 2020.2 & 2021 for Windows.
– Added 22 registration mark-types to Corel and Illustrator plugins.
– Fixed clipping issue when using rotated view and 0-degrees.
– Improved creating contours in Adobe Illustrator Plugin.
– Fixed step-by-step overlap stray line when using rotated view.
– Added curve-resolution option in cutter-dialogue.
– Added linear curve-interpolation option in cutter-dialogue.
– Fixed rare occasion of blade-offset giving a trailing line on sharp-cusps.
– Added Gunner drivers with support for contourcut.
– Updated Pixmax drivers.
– Added support for Vulcan SC-350 sheet cutter.
– Added support for Vulcan contour-cut with graphics outside of regmarks.
– Refactored sorting and memory-management in general.
– Refactored postscript-parser and improved loading speed and stability.
– Fixed rare case of crash when exiting the attributes-dialogue.

SignCut Pro 2 Version 1.479

– Added dashed types for perf-cut.
– Fixed weeding lines staying when rotating.
– Updated Roland, Summa, and Vulcan drivers.
– Added auto-detected spoolers running on the network.
– Changed rotation to be clockwise as Pro 1.
– Added Rheinstern drivers.
– Added forward feed value after the cut.
– New CorelDraw plugin for export.
– New CorelDraw plugin for creating contours.
– New CorelDraw plugin for creating registration marks.
– Changed SkyCut drivers to use a rotated view as default.
– Fixed SVG-filter to support gradient-shapes as black instead of ignoring them.
– Adobe Illustrator 2020 plugin added.
– Added Vulcan contour cut with QR-code support.
– Added Georgian language.
– Added Kingrabbit contour cut.
– Added MyCut contour cut.
– Added Creation CR-USB and Bossa (Com-port) support.

SignCut Pro 2 Version 1.477

– Updated Spooler to V0.17.
– Fixed accidental resend of a job after system shutdown.
– Updated Chinese translation.
– Updated Czech translation.
– Added new RedSail drivers.
– Updated Adobe Illustrator Plugin (31 plugins)
– Adobe Plugin now includes a tool to create registration marks for contour cutting.
– Adobe Plugin now supports sending only selected items to SignCut.
– Added KingRabbit drivers.
– Added support for Creation CR-USB and Bossa COM-port.
– Added MyCut drivers.
– Fixed missing colors when using Inkscape EPS-format.

SignCut Pro 2 Version 1.476

– Fixed cut selected objects that did not work properly in the previous version.
– Fixed registration marks did not cut the specified amount of laps.
– Added option to transfer account feature.
– Added optional colour preview.
– Added option to change cut colour order in the cut-out dialogue.
– Added option to change settings attributes for each colour in the cut-out dialogue.
– Added best-practises AI-algorithms to improve cutting quality.
– Added test-button for the TCP-Ip dialogue.
– Changed weeding lines to be cut after the image for better cutting quality.
– Added automatic overcut value when setting blade offset to ensure better quality.
– Added support for registration marks inside the image in X-length direction to save material.
– Added sorting as zig-zag as an option.
– Added sorting by colour as an option.
– Added cutting inner objects first feature.
– Added Liyu contour cut.
– Added 49 new Liyu drivers.
– Added CorelDraw 2018 patch 1 (20.1.0.708) plugin.
– Added CorelDraw 2019 patch 1 (21.1.0.643) plugin.
– Updated SignCut Draw to 1.21.

System Requirements

MacOS X 10.10 or higher
Memory: 256 MB system RAM
Hard Drive: 120 MB or more free space
Output: USB, serial, serial to USB converter,
TCP/IP, Ethernet

SignCut Pro 2 Version 0.1.480

– New Adobe Illustrator Plugins for Illustrator 2020.0, 2020.1, 2020.2 & 2021 for Mac.
– Added 22 registration mark-types to the Illustrator plugins.
– Fixed clipping issue when using rotated view and 0-degrees.
– Improved creating contours in Adobe Illustrator Plugin.
– Fixed step-by-step overlap stray line when using rotated view.
– Added initial dark-mode support for Mac Os.
– Added curve-resolution option in cutter-dialogue.
– Added linear curve-interpolation option in cutter-dialogue.
– Fixed rare occasion of blade-offset giving a trailing line on sharp-cusps.
– Added Gunner drivers with support for contourcut.
– Updated Pixmax drivers.
– Added support for Vulcan SC-350 sheet cutter.
– Added support for Vulcan contour-cut with graphics outside of regmarks.
– Refactored sorting and memory-management in general.
– Refactored postscript-parser and improved loading speed and stability.
– Fixed rare case of crash when exiting the attributes-dialogue.
– Added support for Apple Silicon M1 ARM64-architecture.

Download » BETA VERSION FOR MAC 10.10+

Download » BETA VERSION FOR MAC 10.15+
Universal binary for Arm64 M1-Processor

SignCut Pro 2 Version 1.479

– Added dashed types for perf-cut.
– Fixed weeding lines staying when rotating.
– Updated Roland, Summa, and Vulcan drivers.
– Added autodetected spoolers running on the network.
– Changed rotation to be clockwise as Pro 1.
– Added Rheinstern drivers.
– Added forward feed value after the cut.
– Changed SkyCut drivers to use a rotated view as default.
– Fixed SVG-filter to support gradient-shapes as black instead of ignoring them.
– Adobe Illustrator 2020 plugin added.
– Added Vulcan contour cut with QR-code support.
– Added Georgian language.
– Added Kingrabbit contour cut.
– Added MyCut contour cut.
– Added Creation CR-USB and Bossa (Com-port) support.
– Added Apple Catalina support.
– Updated Illustrator plugins for Catalina support.

SignCut Pro 2 Version 1.477

– Updated Spooler to V0.17, fixes accidental resend of the job after system shutdown.
– Updated Chinese translation.
– Updated Czech translation.
– Added new RedSail drivers.
– Added KingRabbit drivers.
– Added support for Creation CR-USB and Bossa COM-port.
– Added MyCut drivers.
– Fixed missing colors when using Inkscape EPS-format.

SignCut Pro 2 Version 1.476

– Fixed cut selected objects that didn't work properly in the previous version.
– Fixed registration marks did not cut the specified amount of laps.
– Added option to transfer account feature.
– Added optional colour preview.
– Added option to change cut colour order in the cut-out dialogue.
– Added option to change settings attributes for each colour in the cut-out dialogue.
– Added best-practises AI-algorithms to improve cutting quality.
– Added test-button for the TCP-Ip dialogue.
– Changed weeding lines to be cut after the image for better cutting quality.
– Added automatic overcut value when setting blade offset to ensure better quality.
– Added support for registration marks inside the image in X-length direction to save material.
– Added sorting as zig-zag as an option.
– Added sorting by colour as an option.
– Added cutting inner objects first feature.
– Added Liyu contour cut.
– Added 49 new Liyu drivers.

SignCut Pro 2 Video Tutorials

Get to know the basic setup and feature how-tos! Watch our quick training videos. These easy-to-follow videos will get you started in no time.

Helpdesk Portal

Get the help that you need. If you are having setup difficulties, you are more than welcome to visit our helpdesk portal or just send us a ticket!

Download To Get Started

Get the latest version of SignCut Pro 2 now.

AM.CO.ZA

• V-Series Vinyl Cutter
• V-360
• V-800
• V-850
• V-1120
• V-1130
• V-1330
• V-1360
• V-1660
• V-1700
• V-Smart Series Vinyl Cutter
• V3-440
• V3-740
• V3-1080
• V3-1310
• V3-1360
• V3-1660
• V-Auto Vinyl Cutter
• V6-900
• V6-1500
• V6-1800

ANAgraph

• ANA Express AE-101
• ANA Express AE-101E
• ANA Express AE-120
• ANA Express AE-120E
• ANA Express AE-60
• ANA Express AE-60E
• ANA Express AE-70
• ANA Express AE-70E
• ANA Express AE-75
• ANA Express AE-75E
• ANA Express AE-75SB
• ANA Express AR-70E

ASC365

• ASC365 ASC-1
• ASC365 720
• ASC365 JK871
• ASC365 JK721
• ASC365 JK1351
• ASC365 870PE
• ASC365 TH38DB

APD Extreme Series Plotter

• PD-2400 24' Vinyl Cutter
• PD-3000 30' Vinyl Cutter
• PD-4000 40' Vinyl Cutter
• PD-4800 50' Vinyl Cutter

Arthur

• Arthur SA-720C
• Arthur SA-1350C
• Arthur SA-720S
• Arthur SA-1350S

Artsign

• AS-1120
• AS-1360
• AS-1780
• AS-360
• AS-720
• AS-800
• AS-960
• KS720
• KS850
• KS1100
• KS1350
• OPOS12
• OPOS18
• OPOS24

BananaB

• BananaB 14 Inch Vinyl Cutter
• BananaB 28 Inch Vinyl Cutter
• BananaB 34 Inch Vinyl Cutter
• BananaB 54 Inch Vinyl Cutter

BDF

• AIP-0720 Cutter
• AIP-0800 Cutter
• AIP-1120 Cutter
• AIP-1360 Cutter

Black Cat

• Cougar C-12
• Cougar C-13
• Cougar C-18
• Cougar C-24
• Cougar C-30
• Cougar C-48
• Lynx 12
• Lynx 15
• Lynx 18
• Lynx 24
• BobCat
• Cougar Plus
• Cougar Pro 13
• Cougar Pro 15
• Cougar Pro 18
• Cougar Pro 24
• Cougar-SB

Black Sail

• Black Sail BS 721
• Black Sail HBC 870
• Black Sail HBC 1351

BossKut

• Gazelle

BREN

• BREN 424 CraftPro
• BREN 724 Razor Cutter
• BREN 740 Razor Cutter
• BREN 752 Razor Cutter

Bridge

• Bridge C-24
• Bridge C-48
• Bridge MH365
• Bridge MH720
• Bridge PRO-360
• Bridge PRO-720
• Bridge PRO-870
• Bridge Pro-1100
• Bridge Pro-1350

Brother Electronic Cutting Machine

Export as FCM compatible files only

• ScanNCut CM100DM
• ScanNCut CM250
• ScanNCut CM350
• ScanNCut CM550DX
• ScanNCut CM650WX
• DesignNCut DC200
• ScanNCut DX SDX125
• ScanNCut DX SDX225

Bascocut

• Bascocut C-24L
• Bascocut C-48L
• Bascocut C-59L
• Bascocut C-24AX
• Bascocut C-48AX
• Bascocut CS-24LX
• Bascocut CS-48LX
• Bascocut E-24AX
• Bascocut E-48AX
• Bascocut E-24XL
• Bascocut E-48XL
• Bascocut ES-24LX
• Bascocut ES-48LX
• Bascocut E-49XXL
• Bascocut E-59XL
• Bascocut L3
• Bascocut L5

Calortrans

• Calortrans CT30
• Calortrans CT60
• Calortrans CT120

Craftwell

• eCraft

Cricut

• Cricut Explore (export as SVG to upload into Design Space only)
• Cricut Maker (export as SVG to upload into Design Space only)

Croc-Cut

• Croc-Cut ARMS 720mm Vinyl Cutter
• Croc-Cut ARMS 1400mm Vinyl Cutter
• Croc-Cut ARMS 1800mm Vinyl Cutter
• Croc-Cut SERVO 720mm Vinyl Cutter
• Croc-Cut SERVO 1400mm Vinyl Cutter
• Croc-Cut STEPPER 720mm Vinyl Cutter
• Croc-Cut STEPPER 1400mm Vinyl Cutter

Cole

• Cole CL220/340
• Cole CL365
• Cole CL720
• Cole CL870
• Cole CL1100
• Cole CL1350

Copam

• Copam CP-2500
• Copam CP-250A
• Copam CP-2800
• Copam CP-3050
• Copam CP-3500
• Copam CP-4050
• Copam CP-4500
• Copam CP-6800
• Copam CP-7800
• Copam CP-8800

COTEK

• COTEK CTK-360C
• COTEK CTK-720C
• COTEK CTK-870C
• COTEK CTK-1100C
• COTEK CTK-1350C

Creation Technology(H.K.)

• KCut Pro CA24(CA630)
• KCUT Pro CT24(CT630)
• KCUT Pro CT36(CT900)
• KCUT Pro CT48(CT1200)
• Creation HK KingCut CT
• Creation HK KingCut CA
• Creation HK KCUT CX280
• Creation HK KCUT Pro B12
• Creation HK KCUT Pro B24
• Creation HK KCUT Pro B48
• Creation PCut CR630
• Creation PCut CR730
• Creation PCut CR900
• Creation PCut CR1080
• Creation PCut CR1200
• Creation PCut CR1300
• Creation PCut CB730
• Creation PCut CB1300
• Creation PCut CS630
• Creation PCut CS 900
• Creation PCut CS 1080
• Creation PCut CS1200
• Creation PCut CT630
• Creation PCut CT900
• Creation PCut CT1200
• Creation PCut CT 700
• Creation PCut CT 1000
• Creation PCut CT 1080
• Creation PCut CT 1300
• Creation PCut CT 1500
• Creation PCut CT 1600
• Creation PCut CTO series

CUTOK

• CUTOK DC240
• CUTOK DC330

CUYI

• CUYI CS630
• CUYI CS1200
• CUYI CTO330
• CUYI CTO630
• CUYI CTO900
• CUYI CTO1200
• CUYI MK630 (24')
• CUYI MK1200 (48')
• CUYI MG630
• CUYI MG1200

Summa Drivers Download

Desay Master

• Master Vinyl Cutter XY-300P
• Master Vinyl Cutter XY-380P
• Master Vinyl Cutter XY-450P
• Master Vinyl Cutter XY-520
• Master Vinyl Cutter XY-540P
• Master Vinyl Cutter XY-660P
• Master Vinyl Cutter VC2000
• Master Tiger Series
• TC-3000
• TC-4000
• TC-5000
• VL-300P
• VL-400P
• VL-500P

DGI

• Omega OM-40
• Omega OM-60
• Omega OM-70
• Omega OM-80
• Omega OM-100
• Omega OM-130
• Omega OM-150

Dika

• Dika DK 720
• Dika DK 880
• Dika DK 1150
• Dika DK 1350
• Dika DK 1700

Dragon

• Dragon DP800
• Dragon DP1000
• Dragon DP1200
• Dragon DP1260NX
• Dragon Pro LGZ 1380

EastSign

• EastSign A24/30/40/48
• EastSign B24/30/40/48
• EastSign ECP-35
• EastSign ECP-48
• EastSign ECP-63
• EastSign ECP-400
• EastSign ECP-600
• EastSign S240
• EastSign S330

E-cut

• E-cut EH-375AB
• E-cut EH-720AB
• E-cut EH-870AB
• E-cut EH-1350AB
• E-cut EH-375D
• E-cut EH-720D
• E-cut EH-870D
• E-cut EH-1350D
• E-cut KI-375D
• E-cut KI-720D
• E-cut KI-870D
• E-cut KI-1350D
• E-cut SK-375D
• E-cut SK-720D
• E-cut SK-870D
• E-cut SK-1350D
• E-cut SL-1350RV

Fenta

• Fenta SL440 vinyl cutter
• Fenta SL740 cutting plotter
• Fenta SL1320 vinyl cutter
• Fenta SL1660 vinyl cutter

FlyCut

• FlyCut Contour Cutter Plotters
• FY-720
• FY-850
• FY-1100
• FY-1350
• FY-1600H
• CZ Regular Series Cutter Plotters
• CZ720
• CZ870
• CZ1350
• Portable Contour Cutting Plotter
• MC-330
• MC-240
• Reflective Film Cutter Plotter
• SG-1350F

FocusBinding

• FocusBinding FPT-1200
• FocusBinding FPT-330
• FocusBinding FPT-630

Foison

• Foison C12/18/24/30/36/48
• Foison C12/24/48/60 Pro
• Foison CT 630/1200
• Foison E24
• Foison FS24/48
• Foison Koala K14
• Foison S24/48
• Foison V48 Pro/V60 Pro
• Foison X24/48
• Foison Z13 Pro

Galaxy

• Galaxy Elite 15' Cutter
• Galaxy Elite 24' Cutter
• Galaxy Elite 48' Cutter
• Galaxy Pro 24' Cutter
• Galaxy Pro 48' Cutter

GCC

• GCC AR24
• GCC Bengal BN-60
• GCC Bobcat BI-30
• GCC Bobcat BI-60
• GCC Expert 24
• GCC Expert 24-PID_0031
• GCC Expert 24-PID_0011
• GCC Expert 24LX
• GCC Expert 52
• GCC Expert 52LX
• GCC Expert II 24
• GCC Expert II 24 LX
• GCC Expert II 52
• GCC Expert II 52LX
• GCC Expert II PRO EP-60
• GCC Expert II PRO EP-132S
• GCC i-Craft 2.0
• GCC Jaguar Series
• Jaguar II
• Jaguar JII-61
• Jaguar JII-76S
• Jaguar JII-101S
• Jaguar JII-132S
• Jaguar III-61
• Jaguar III Ja-101S
• Jaguar III Ja-132S
• Jaguar III Ja-183S
• Jaguar J4-61
• Jaguar J4-101S
• Jaguar J4-132S
• Jaguar J4-183S
• Jaguar V J5-61
• Jaguar V J5-61LX
• Jaguar V J5-101
• Jaguar V J5-101LX
• Jaguar V J5-132
• Jaguar V J5-132LX
• Jaguar V J5-183LX
• Jaguar JG-61S
• Jaguar JG-76S
• Jaguar JG-101S
• Jaguar JG-132S
• GCC RX series
• RX-61
• RX-101S
• RX-132S
• RX-183S
• GCC RX II series
• RX II-61
• RX II-101S
• RX II-132S
• RX II-183S
• RX II-CR
• GCC Lynx S-30
• GCC Lynx S-60
• GCC Lynx S-132
• GCC Puma SP-30
• GCC Puma SP-60
• GCC Puma II-60
• GCC Puma II-132
• GCC Puma III P3-60
• GCC Puma III P3-132S
• GCC Puma III DX
• GCC Puma IV
• GCC Puma IV LX
• GCC Sable SB-60
• GCC SignPal98 GRC-30
• GCC SignPal98 GRC-50
• GCC SignPal Supreme 98 GRC-61
• GCC SignPal Supreme 98 GRC-76S
• GCC SignPal Supreme 98 GRC-101S
• GCC SignPal Supreme 98 GRC-132S
• GCC Ultra GRC-50
• GCC Ultra GRC-61
• GCC Ultra GRC-76S
• GCC Ultra GRC-101S
• GCC Ultra GRC-132S
• GCC UltraPlus GRC-50
• GCC Vogue TP-183P

Geokit Vinyl Cutter

• Geokit CT630
• Geokit CT1200

Gercutter

• Gercutter Pro

Gerber

• Gerber FasTrack 650
• Gerber FasTrack 750
• Gerber FasTrack 1000
• Gerber FasTrack 1300

Generic Plotter

• Plotter Generic - HPGL
• Plotter Generic - DMPL

GJD

• GJD-720
• GJD-800
• GJD-1120
• GJD-1360

GoldCut （Also known as JinKa）

View the GoldCut Cutter Setup Guide for Mac

• Goldcut GC-12
• Goldcut GC-24
• Goldcut GC-30
• Goldcut GC-48
• Goldcut GC240
• Goldcut GC330
• Goldcut GC360
• Goldcut GC361
• Goldcut GC720
• Goldcut GC721
• Goldcut GC870
• Goldcut GC871
• Goldcut GC1101
• Goldcut GC1351
• Goldcut HE721
• Goldcut HE871
• Goldcut HE1101
• Goldcut HE1351
• Goldcut PE365
• Goldcut PE721
• Goldcut PE870
• Goldcut PE1351
• Goldcut XE365
• Goldcut XE721
• Goldcut XE1351
• Goldcut XL721E
• Goldcut XL871E
• Goldcut XL1351E
• Goldcut GC24-ABJ
• Goldcut GC48-ABJ
• Goldcut GC24-ASF
• Goldcut GC48-ASF
• Goldcut XL-24ABJ
• Goldcut XL-48ABJ
• Goldcut XL24ASF
• Goldcut XL48ASF
• Goldcut YS-360
• Goldcut RH-1350
• Goldcut JK720
• Goldcut JK721
• Goldcut JK870
• Goldcut JK871
• Goldcut JK1101
• Goldcut JK1351
• Goldcut JK240
• Goldcut JK330
• Goldcut JK360
• Goldcut JK361
• Goldcut JK721-B
• Goldcut JK1101-B
• Goldcut JK1351-B
• Goldcut JK 630
• Goldcut JK 1220
• Goldcut KS721

Graphtec

• Graphtec CC100
• Graphtec CC200
• Graphtec CC300
• Graphtec CE1000-60
• Graphtec CE2000-120
• Graphtec CE2000-60
• Graphtec CE2800-60
• Graphtec CE3000-120
• Graphtec CE3000-40
• Graphtec CE3000-40-CRP
• Graphtec CE3000-60
• Graphtec CE3000 MK2-60
• Graphtec CE3000 MK2-120
• Graphtec CE3000 120AP
• Graphtec CE5000-40-CRP
• Graphtec CE5000-60
• Graphtec CE5000-120
• Graphtec CE6000-120AP
• Graphtec CE6000-40 Plus
• Graphtec CE6000-60 Plus
• Graphtec CE6000-120 Plus
• Graphtec CE6000 AKZ
• Graphtec CE7000-40
• Graphtec CE7000-60
• Graphtec CE7000-130
• Graphtec CE7000-160
• Graphtec CE LITE-50
• Graphtec CraftRobo CC 100-20
• Graphtec CraftRobo CC 300-20
• Graphtec CraftRobo CC 200-20
• Graphtec CraftRobo CC 330-20
• Graphtec CraftRobo Pro
• Graphtec FC2100-120
• Graphtec FC2100-50
• Graphtec FC2100-60
• Graphtec FC2100-90
• Graphtec FC2200-50
• Graphtec FC2200-90
• Graphtec FC2200-90EX
• Graphtec FC223X-60
• Graphtec FC223X-90
• Graphtec FC223X-90EX
• Graphtec FC2250-120
• Graphtec FC2250-180
• Graphtec FC2250-60
• Graphtec FC2300-50
• Graphtec FC3100-100
• Graphtec FC3100-120
• Graphtec FC3100-60
• Graphtec FC3200-50
• Graphtec FC3200-90
• Graphtec FC3200-90EX
• Graphtec FC3209-60
• Graphtec FC3212-180
• Graphtec FC3212-240
• Graphtec FC3212-90
• Graphtec FC3600
• Graphtec FC4100-100
• Graphtec FC4100-130
• Graphtec FC4100-75
• Graphtec FC4200-50
• Graphtec FC4200-60 Series
• Graphtec FC4210-60 Series
• Graphtec FC4550
• Graphtec FC5100-75
• Graphtec FC5100-100
• Graphtec FC5100-130
• Graphtec FC5100-150
• Graphtec FC5100A Series
• Graphtec FC7000 MK2-60
• Graphtec FC7000 MK2-75
• Graphtec FC7000 MK2-100
• Graphtec FC7000 MK2-130
• Graphtec FC7000 MK2-160
• Graphtec FC7000-60
• Graphtec FC7000-75
• Graphtec FC7000-100
• Graphtec FC7000-130
• Graphtec FC7000-160
• Graphtec FC8000-100
• Graphtec FC8000-130
• Graphtec FC8000-60
• Graphtec FC8000-75
• Graphtec FC8600-60
• Graphtec FC8600-75
• Graphtec FC8600-100
• Graphtec FC8600-130
• Graphtec FC8600-160
• Graphtec FC9000-100
• Graphtec FC9000-140
• Graphtec FC9000-160
• Graphtec FC9000-75
• Graphtec FCX2000
• Graphtec FCX4000-50
• Graphtec FCX4000-60

Helo

• Helo HSP 360
• Helo HSP 720
• Helo HSP 1360

HighLight

• HighLight HL721A
• HighLight HL721B
• HighLight HL721C
• HighLight HL1351C

HobbyCut

• HobbyCut ABH-361
• HobbyCut ABH-721
• HobbyCut ABH-1351
• HobbyCut HBC 1350 Series II
• HobbyCut HBC 1350 Series III
• HobbyCut EH-360
• HobbyCut EH-361
• HobbyCut HBC-720
• HobbyCut HBC-720S
• HobbyCut HBC-720 Pro
• HobbyCut HBC 720 Series II
• Hobbycut HBC 720 Series III
• HobbyCut TC-631
• HobbyCut TC-801

Houston Instruments

• DMP-100
• DMP-40
• DMP-52
• DMP-56
• DMP-60
• DMP-61
• DMP-65
• DMP-65C
• DMP-66C
• DMP-69
• DMP-69C

Ioline

• Ioline 600Ae
• Ioline ArtPro LP3500
• Ioline Classic
• Ioline LP 3700 (HP-GL)
• Ioline LP 4000 (HP-GL)
• Ioline Signature5000 (HPGL)
• Ioline SmarTrac I/S 60
• Ioline SmarTrac I/S 85
• Ioline SmarTrac I/S 100
• Ioline SmarTrac I/S 110
• Ioline SmarTrac I/S 130
• Ioline SmarTrac SC-30
• Ioline SmarTrac SC-40
• Ioline SmarTrac SC-48
• Ioline SmarTrac SC-72
• Ioline SmarTrac Contour 110
• Ioline SmarTrac Contour 130
• Ioline SmarTrac Contour 60
• Ioline SmarTrac Contour 85
• Ioline Studio 8 (HP-GL)
• Ioline Studio 8-20
• Ioline Studio 8-24
• Ioline Studio 8-30
• Ioline Studio 8-40
• Ioline Studio 8/40T
• Ioline Studio 8-52T
• Ioline Studio7/24
• Ioline Studio7/36
• Ioline Summit
• Ioline Summit-2200
• Ioline Summit-910
• Ioline Super 88/30
• Ioline Super 88/30 GS
• Ioline Super 88/40
• Ioline Super 88/40 GS
• Ioline Super 88/52
• Ioline Super 88/52 GS/DR

Janome

• Artistic Edge 12
• Artistic Edge 15

JiaChen

• JC-720E
• JC-850E
• JC-1100E
• JC-1350E
• JC-720H
• JC-850H
• JC-1100H
• JC-1350H
• JC-720DS
• JC-850DS
• JC-1100DS
• JC-1350DS
• JC-1600DS

JinKa

• Jinka GC-24S
• Jinka GC-48S
• GC-ABJ Series
  • JinKa GC-721ABJ
  • JinKa GC-1351ABJ
• GC-ASF Series
  • JinKa GC-721ASF
  • JinKa GC-1351ASF
• JK Series
  • JinKa JK-721 / 720
  • JinKa JK-871 / 870
  • JinKa JK-1101
  • JinKa JK-1351
  • JinKa JK-240
  • Jinka JK-330
  • Jinka JK-361 / 360
  • Jinka JK-365
  • JinKa JK-720HE
  • JinKa JK-870HE
  • JinKa JK-1100HE
  • JinKa JK-1350HE
• PE Series
  • Jinka PE365
  • Jinka PE721
  • Jinka PE871
  • Jinka PE1101
  • Jinka PE1351
• XE Series
  • Jinka XE365
  • Jinka XE721
  • Jinka XE871
  • Jinka XE1101
  • Jinka XE1351
• XL Series
  • Jinka XL-24ABJ
  • Jinka XL-48ABJ
  • Jinka XL-721ABJ
  • Jinka XL-451E
  • Jinka XL-721E
  • Jinka XL-871E
  • Jinka XL-1101E
  • Jinka XL-1351E
• JinKa YS-380

Summa D520 Driver

JSI

How To Install Summa Drivers In Onyx Thrive

• JSI 24
• JSI G24
• JSI P-24
• JSI Pro K24
• JSI Pro K30

KASA

• KASA PRO Series IV K1355 Vinyl Cutter
• KASA PRO Series IV K365 Desktop Vinyl Cutter
• KASA PRO Series IV K725 Vinyl Cutter
• KASA JK Series IV Vinyl Cutter

Summa Driver

Katana

• Katana BYF
• Katana KII-1350
• Katana KII-720

Koala

Summa Drivers Windows 7

• Koala (AutoMark)
• Koala (Manual)